Removes the pair valve hose and housing on the Honda 500 twin. A must if using aftermarket exhaust. Easy install. Fits all Honda 500 engines equipped with pair valve emissions. Not CARB or EPA legal. For off-road use only.
Honda CB500/SCL500 PAIR Valve Delete Kit
Simply locate and remove the PAIR valve housing on the top of the valve cover held in with two 8mm hex head screws as well as the hose from it to the electric solenoid. Use the supplied cap to cap-off the hose side of the solenoid. We recommend removing the Philips screws out of the valves along with the reed valves themselves. Reinstall the empty reed valve plates with their perimeter gaskets back into the valve cover followed by the supplied block-off plate. The lock washers will need to be installed under the bolt heads.
